Shop Best Spiral Duct Fittings in NUOENWEI

Both air ducts are used with barn air conditioner coolers, with basic properties such as flame retardant, corrosion resistance and heat insulation, but with significant differences in core parameters:

High quality duct:

main color is yellow, thickness 4mm, lower thermal conductivity (0.027 W/(m.K)), total weight 650±20 g/m³, tensile strength up to 2300N.

General duct:

the main color is orange or army green, thickness 2mm, thermal conductivity is slightly higher (0.037 W/(m.K)), total weight 350±20 g/m³, tensile strength is 563N.

1. Material and structure

Fabric Thickness: 0.55mm for high quality model vs 0.38mm for general model, the former is more wear-resistant and durable.

2.Total weight:

High-quality model is heavier (650±20 g/m³), but with better heat preservation effect; general model is lightweight (350±20 g/m³), suitable for temporary or mobile scenes.

1. Material and structure

Fabric Thickness: 0.55mm for high quality model vs 0.38mm for general model, the former is more wear-resistant and durable.

Total weight: High-quality model is heavier (650±20 g/m³), but with better heat preservation effect; general model is lightweight (350±20 g/m³), suitable for temporary or mobile scenes.、

2. Mechanical properties

Tensile strength: High quality model (2300N) is 4 times more than general model (563N), suitable for high pressure environment.

Tear strength: the general model (360N/5cm) is slightly higher than the high-quality model (300N/5cm), but the adhesion force is only 35N/5cm (90N/5cm for high-quality model), with higher risk of easy delamination.

3. Thermal insulation and temperature resistance

Thermal conductivity: High-quality models 0.027 W/(m.K) is better than general models 0.037 W/(m.K), reducing cold air loss by about 30%.

Temperature resistance: both cover -30°C to +80°C (measured value), but the high-quality model claims in the user's description that the upper limit of temperature resistance is up to 100°C, which is suitable for harsher environments.

4. Safety approvals

Flame retardancy: The high-quality model has passed UL94 VTN4-0 certification (international general standard), while the general model is only labeled “BZ”, which may be a regional standard and requires further confirmation.

High-quality ducts:

suitable for long-term fixed installation, high demand for air-conditioning delivery (such as large grain silos, data centers), especially focusing on energy saving and durability.

General duct:

suitable for short-term projects, limited budget or frequent movement of the occasion (such as temporary storage, small workshop).

When choosing air conditioning insulation ducts, it is necessary to weigh the cost and performance requirements. If you are looking for long-term stable operation and high energy efficiency, high-quality ducts are ideal; while general models are lightweight and economical, suitable for non-intensive scenarios. It is recommended to prioritize reference to authoritative testing standards (e.g. DIN, BS) and verify the certification details provided by suppliers to ensure system safety and performance.

▶️ Sample testing has been provided for some national cold airports

▶️ Support small batch customized production, technical consultation please contact: [Elaine/sales@fsnuowei.com ]

▶️ Visit the official website to view the video: [https://www.nuoenwei.com]

NUOENWEI to Exhibit at the 2025 Shanghai International Refrigeration, Air Conditioning, Heating and Ventilation Equipment Exhibition.

NUOENWEI a leading manufacturer of flexible ducts, is proud to announce its participation in the upcoming 2025 Shanghai International Refrigeration, Air Conditioning, Heating and Ventilation Equipment Exhibition, to be held from April 8-10, 2025, at the Shanghai World Trade Center.

At this prestigious event, NUOENWEI will showcase a wide range of advanced ventilation products, including:

• Airport Ground Air Conditioning Air Supply Hoses
• Special Air Conditioning Insulation Ducts
• High Temperature Flexible Ducts
• Anti-Static Flexible Ducts
• And other flexible ducting solutions

This exhibition brings together industry leaders and innovators from across the globe to discuss the latest trends and technologies in the refrigeration, air conditioning, heating, and ventilation sectors. Novelty Ventilation Equipment Co., Ltd’s participation underlines its commitment to providing cutting-edge ventilation solutions that meet the diverse needs of various industries.

Visit our booth at the Shanghai World Trade Center to explore our high-performance flexible ducts and learn how our products can help you optimize your ventilation systems for superior efficiency and safety.

For more information, please contact:

▶️Support small batch customized production, technical consultation please contact: [Elaine/sales@fsnuowei.com ]

▶️ Visit the official website to view the video: [https://www.nuoenwei.com]

We look forward to seeing you at the event!

• Chemical Plant Explosions: 2023 ITCO (International Tank Container Organization) report indicates static ignition causes 23% of hazardous material incidents

• Mining Disaster Analysis: Chile Copper Mine study shows metal duct sparks triggered 17% of methane explosions in 2010-2023

• 
  

• Fire Spread Risk: Standard PVC melts at 80°C with flaming drips 

• Static Accumulation: Surface resistivity >10¹²Ω generates 8,000V+ in powder transfer

• Structural Failure: Galvanized steel rings deform by 41% under 0.3MPa negative pressure
  

• • AS/NZS 1530:2022 Certification Highlights:

    • Vertical burn test: Self-extinguishing within 3s (vs. >30s for PVC)

    • Zero ignition of cotton pad by molten drops

    • Stable performance from -30°C to +120°C

• • • IEC 62631 Compliance:

      • Surface resistivity: 10⁴-10⁶Ω (Meeting ISO 8031:2020 Level A)

      • Charge decay: <2s (Field test data from global sites)

• Military-Grade Spring Steel Skeleton:

  • High-carbon steel tensile strength: ≥1,500MPa (3× standard alloys)

  • 100,000 bending cycles with zero structural failure

• Solution:

  • Real-time conductivity monitoring ports

  • Spark-proof couplings with ISO 80079-36 certification

• Case Study: US Lithium-Ion Plant

  • Post-installation: Static incidents reduced by 91%

  • Maintenance costs decreased by $18,700/month

• Approvals:

  • AS/NZS 1530:2022 (Certificate #: AU-FR-2023-0892)

  • IECEx Certified (IEC 62631)

  • ATEX Category 3G/3D Compliance

Australian Lithium Mine Upgrade:

• 92% reduction in static-related downtime

• ROI achieved in 5.3 months

• Live Chat: 24/7 Engineering Support
• 🌐 website: https://www.nuoenwei.com
• 📧 Email: sales@fsnuowei.com

In flammable and explosive environments, the air may be filled with flammable gases (e.g., methane, hydrogen, solvent vapors) or flammable dusts (e.g., coal dust, metal dust, grain dust, plastic dust). These substances mixed with air to reach a certain concentration (explosive limit), just a tiny ignition source, can trigger a catastrophic explosion or fire.

Ordinary non-conductive PVC or cloth ventilation hose, is precisely the manufacture of this ignition source “master”:

Friction generates electricity: When the high-speed airflow (especially containing dust particles of airflow) through the interior of the hose, dust particles and the wall, as well as the wall of the material itself between the molecules will occur intense friction and collision.

Static build-up: This friction causes a large amount of static charge to build up on the surface of the hose wall. Ordinary plastics or fabrics are excellent insulators, the charge can not be conducted away, the voltage can easily accumulate to thousands or even tens of thousands of volts!

Spark Discharge: An electrostatic spark discharge occurs when the voltage of the accumulated static charge is high enough, or when the hose comes into contact with another conductor (such as a metal bracket, equipment enclosure), or when it is folded or jiggled. This instantaneous release of energy is tiny, but more than enough for many combustible materials.

Due to the extreme danger of electrostatic sparking in flammable and explosive environments, major industrial safety regulations around the world have clear and strict requirements:

International standards (e.g. OSHA, ATEX, IECEx):

• The U.S. Occupational Safety and Health Administration (OSHA), in relevant standards (e.g. 29 CFR 1910.307 - Hazardous (Classified) Locations), requires that all electrical and non-electrical equipment (including ventilation equipment) used in hazardous areas (Class I - gaseous vapors, Class II - dust) must be protected by appropriate explosion protection. This explicitly covers protection against electrostatic discharge. This explicitly covers the requirement to prevent static ignition.
• The EU ATEX Directive (2014/34/EU) and the international IECEx system make it mandatory for equipment used in potentially explosive atmospheres (including ventilation ducts) to be certified to ensure that it is designed to prevent it from being an effective source of ignition, with the control of static discharges being one of the core assessments. Equipment must be clearly labeled with the applicable explosion-proof zone rating (e.g. Zone 1/21, Zone 2/22).

Chinese National Standard (GB):

China also has strict national standards for equipment used in explosive atmospheres, such as the GB 3836 (Electrical Equipment for Explosive Environments) series of standards, and the GB 12476 (Equipment for Combustible Dust Environments) series of standards for non-electrical equipment. These standards make it mandatory for equipment (including ventilation ducts) to take effective measures to prevent static build-up and spark discharge, usually by requiring the conductive parts of the equipment to be reliably grounded to ensure that the resistance to ground is less than a specified value (usually less than 10⁶ Ω, or even lower, depending on the area and medium).

The core requirements boil down to one thing: ventilation equipment used in hazardous areas must be able to effectively control static electricity to ensure that no sparks are generated sufficient to ignite the environmental mixture! The use of ordinary non-conductive ducting is a blatant violation of safety regulations and places the company at great legal risk and risk of injury or death.

In the face of electrostatic threats and regulatory requirements, conductive explosion-proof flexible ducts provide a professional and reliable solution, the essence of its design lies in the “active conductive + double grounding” mechanism:

• Mechanism: conductive body: the basis for building the conductive path

The main body of the duct is manufactured using a special process: a Class B flame retardant polyvinyl chloride (PVC) outer layer, embedded with high carbon spring steel wire and reinforced with wear-resistant strips.

Key Points: This construction gives the duct body its own excellent electrical conductivity. The high carbon spring steel wire mesh forms a continuous conductive mesh throughout the duct wall. This fundamentally solves the problem of ordinary insulated ducts having nowhere for the electrical charge to go.

• Double grounding (core explosion-proof design): ensures safe discharge of electrical charge

At both ends of the hose body, two highly conductive tin braided copper wires are carefully installed.

Critical Process: These tin-braided copper wires are not simply attached, but are firmly physically and electrically connected to the high carbon spring steel wire truss structure inside the duct body. This creates multiple, low impedance conductive paths.

Function: In operation, simply connect the two tin-braided copper wires reliably to a known good grounding point (grounding stake or equipment grounding terminal). In this way, the static charge generated by friction inside the duct can be instantly and safely conducted to the earth through the “highway” of steel wire mesh → truss connection point → tin braided copper wire → grounding wire.

• Key Performance Indicator: Pipe Shaft Conductive Fabric Resistance ≤ 2X10³ Ω (i.e. 2000 Ω)

This value is well below the 10⁶ Ω (1,000,000 Ω) threshold normally required by safety standards, and is even 3 orders of magnitude (1000 times) lower!

Significance: The ultra-low resistance value guarantees extremely efficient and reliable charge discharge. There is virtually no chance for static charges to build up to dangerous voltage levels, and any weak charges that may be generated are immediately channeled away, completely eliminating the possibility of static sparking. This is a strong technical guarantee for meeting the most stringent explosion protection requirements (e.g. Zone 1/21).

• Flame-retardant barrier: the last line of defense

Class B flame-retardant PVC enclosure, in the event of an external source of ignition in extreme cases, can extinguish itself after the source of ignition has been evacuated, stopping the flame from spreading along the air duct and buying time for rescue.

In flammable and explosive environments, ventilation systems are key to ensuring the breathing safety of operators, but if the wrong duct is selected, it can become a “time bomb”. Ordinary non-conductive air ducts are a proven source of significant risk for catastrophic explosions due to static electricity buildup and spark discharges generated by friction. Strict global and Chinese safety regulations clearly prohibit the use of such equipment in hazardous areas.

The conductive explosion-proof flexible duct, with its unique body conductive structure and core double grounding (tin-braided copper wire truss connection) design, realizes extremely low duct shaft resistance (≤ 2X10³ Ω), ensuring that static charges are instantly and reliably channeled into the earth, fundamentally eliminating static sparks as a deadly ignition source. At the same time, its flame-retardant properties provide additional security.

Choosing conductive explosion-proof flexible duct is not a cost consideration, but a responsibility for life safety, compliance with laws and regulations, and the cornerstone of sustainable business development. Do not let a seemingly insignificant choice of duct become the weakest link in the line of defense.

Is your work environment characterized by flammable and explosive risks? Does your ventilation system comply with safety regulations? Contact us today for professional consulting and product information on conductive explosion-proof ventilation solutions for your safety!

With the introduction of this article, we hope you have a better understanding of flexible air ducts. If you have any questions or need further information, please feel free to leave a message and communicate with us!

If you want to know more about PCA Hose or technical support, please feel free to contact us.

Contact Information:  

For more information, please contact:  

🌐web : https://www.nuoenwei.com

📞Phone/whatsApp : 86-15875732388

✉️E-mail : sales@fsnuowei.com 

If you are interested in specific applications or customized solutions for air conditioning insulated ducts, you can contact us for professional advice and solutions tailored to your needs. Or you can find us through the following platforms：

https://www.nuoenwei.com/

https://www.youtube.com/@NUOWEIventilation

https://x.com/NUOWEIVENT

https://www.instagram.com/nuoenwei/

https://www.linkedin.com/company/foshan-nuowei-ventilation-co-ltd/?viewAsMember=true

https://www.facebook.com/NuoWeiventilation/